I. Equipment Overview
1) Ultraviolet radiation at a specific band (253.7 nm) decomposes the molecular chain of odor gas, breaking its macromolecular structure into small molecular structure.
2) Ultraviolet radiation at a specific band (185 nm) causes oxygen molecules in the air to produce free oxygen, or reactive oxygen species. Due to the imbalance of positron and electron in free oxygen, it is necessary to combine with oxygen molecules to produce ozone.
3) Under the action of catalyst (TiO2), ozone oxidizes the molecule of broken odor gas into inorganic substances such as CO2 and H2O.
Two. Application scope of equipment
1) spraying, painting, chemicals, pharmaceuticals, pesticides, tobacco, flavors and fragrances, electronics, plastics, plastics, rubber, ink, printing, asphalt, packaging, leather, resins, adhesives, composite boards, paper making, textile, printing and dyeing, food, feed, slaughtering, meat processing, aquaculture, garbage disposal, sewage treatment, etc. .
2) More than 900 gaseous substances are involved, including hydrogen sulfide, ammonia nitrogen, mercaptan, thioether, indole, benzene, nitro, alkane and ether.
Three. Equipment principle
1) Spray paint waste gas purification, printing and painting workshop waste gas treatment equipment using special high-energy high-ozone UV beam irradiation odor gas, cracking odor gas such as ammonia, trimethylamine, hydrogen sulfide, methyl thiol, methyl thioether, dimethyl disulfide, carbon disulfide and styrene, sulfide H2S, VOC, benzene, toluene The molecular chains of xylene combine free pollutant molecules with ozone oxidation to form harmless or harmless compounds with small molecules, such as CO2, H2O, etc.
2) Oxygen molecules in the air are decomposed by high energy ozone UV beams to produce free oxygen, i.e. reactive oxygen species (ROS). Oxygen molecules need to be combined to produce ozone because of the imbalance of positron and positron. UV + O2 - O - O * is well known for its strong oxidation of organic compounds and its strong removal of ozone gases and other irritating odors.
3) After the odor gas is imported into the purification equipment by exhaust air equipment, the purification equipment uses high-energy UV ultraviolet light beam and ozone to decompose and oxidize the odor gas synergistically, so that the odor gas can be degraded into low-molecular compounds, water and carbon dioxide, and be discharged outdoors through the exhaust pipe.
4) Using high-energy UV beam to break down the molecular chains of bacteria in odorous gas, destroy the nucleic acid (DNA) of bacteria, and then through ozone oxidation reaction, to achieve the goal of deodorizing and killing bacteria thoroughly. Four, product structure characteristics
1) Efficient deodorization: it can effectively remove volatile organic compounds (VOC), inorganic substances, hydrogen sulfide, ammonia, mercaptan and other major pollutants, as well as a variety of odor. The deodorization efficiency can reach 99% or more, and the deodorization effect greatly exceeds the odorization pollutant discharge standard issued in 1993 (GB14554-93).
2) No need to add any substances: just need to set up the corresponding exhaust pipe and exhaust power, so that odorous gases through the equipment for deodorization decomposition and purification, without adding any substances to participate in chemical reactions.
3) Strong adaptability: It can be used for deodorization and purification of high concentration, atmospheric volume and different odorous gases. It can work continuously 24 hours a day and run steadily and reliably.
4) Low operating cost: the equipment (without any mechanical action, no noise, no need for special management and daily maintenance), only for regular inspection, the equipment energy consumption is low (every 1000 cubic meters / hour, only about 0.2 degrees of electricity consumption), equipment wind resistance is very low < 50 pa, can save a lot of exhaust power.
Five, technical parameters
Product model
JHRDLZ-50
JHRRDLZ-100
JHRRCO-2000
JHRRCO-3000
JHRRCO-5000
JHRRCO-10000
Handling air volume (Nm3/h)
Five thousand
Ten thousand
Twenty thousand
Thirty thousand
Fifty thousand
One hundred thousand
Exhaust gas concentration (mg/m3)
Less than 400mg/m3
Type of exhaust gas
Size, length (mm) of equipment such as stupid, ester, ketone, alcohol, ether, aldehyde, phenol etc.
One thousand and five hundred
One thousand nine hundred and ten
Two thousand and six hundred
Two thousand and eight hundred
Three thousand and six hundred
Eight thousand and five hundred
Width (mm)
Eight hundred and fifty
Eight hundred and fifty
One thousand and two hundred
One thousand and two hundred
One thousand six hundred and fifty
Two thousand four hundred and fifty
High (mm)
One thousand and eight hundred
One thousand and eight hundred
Two thousand
Two thousand and one hundred
Two thousand and one hundred
Two thousand and one hundred
Six, after sales service
Product warranty time for a year; Jiangsu area within 24 hours to the site maintenance, provinces and cities within 24 hours to respond, 72 hours to the site maintenance. The repair parts price is charged according to the contract price.
Our factory is a professional dedicated to industrial dust and industrial waste gas treatment technology engineering company, is a collection of environmental protection technology research and development, engineering design, technical advice, project contracting, operation and service in one of the high-tech environmental protection enterprises. The main products are pulse bag dust collector, pulse filter cylinder dust collector, wet dust collector, cyclone dust collector, etc. The treatment technology and equipment of waste gas (odor) are: isothermal plasma, photolysis oxidation, high energy ion method and regenerative combustion method, as well as traditional chemical and physical absorption method. In the petrochemical industry, chemical pharmaceutical industry, municipal waste industry, textile printing and dyeing, leather, food and other industries have a large number of excellent performance. In the course of development, the company adheres to the combination of scientific research, design and production services, with new mechanisms, new thinking, new technology to occupy the market, and achieved remarkable results.
Our company is a manufacturer, and can design and produce separately according to various technical requirements put forward by users. Welcome customers to come to consult the related matters, we will serve you wholeheartedly.