Product Name: plastic waste gas treatment (water spray + adsorption)
Product type: plastic pellet exhaust gas treatment equipment
Product information:
1. Plastic granulation waste gas treatment and purification process:
Treatment of plastic granulation waste gas (water spray + activated carbon adsorption)
Two, plastic waste gas treatment process (water spray + activated carbon adsorption process):
Plastic waste gas is produced in the heating process of wire drawing and pelletizing. There is a certain amount of white rubber fume in the process of dissolving plastic and cooling of pelletizing machine. The concentration of glue is high and it is easy to float away with the flow of atmosphere. Therefore, it is necessary to collect the waste gas by collecting hood, enter the water spraying waste gas treatment tower through branch pipe and main pipe, and further clear it through the wet swirl plate waste gas tower. After washing, the organic gas is absorbed by activated carbon in the bed by pressurized induced draft fan. Activated carbon adapts to large flow and low concentration of organic waste gas. Activated carbon adopts granular activated carbon. Its specific surface area (adsorption area) is as high as 500-1500m2/g. Therefore, it has high surface activity. Carbon and adsorption capacity. The discharged low concentration organic gas is adsorbed on its active surface and the purified gas is discharged from the exhaust duct at high altitude.