提起废气处理设备，他是有很多部件租车的，这一点相信大家都应该知道，其中酸雾净化塔就是较为主要的一种。酸雾净化塔经测定分析，硫酸雾净化率可达93%，硝酸净化率可达90%，盐酸雾净化率可达98%，对酸雾净化性能技术指标达到国内先进水平。下 面我们就来为大家详细介绍下： 　废气处理设备酸雾净化塔的功能介绍 　　一般来讲，废气处理设备中酸雾净化塔的原理是废气由玻璃钢离心风机压入净化塔之进气段后，垂直向上与喷淋段自上而下的吸收液起中和反应，使废气浓度降 低，然后继续向上进入填料段，废气在塑料球打滚再与吸收液起中和反应，使废气浓度进一步降低后进入脱水器段，脱去液滴，净化后的气体排出大气。 　　废气处理设备中的酸雾净化塔适用范围广泛电镀、氧化、化工、酸洗、电子电气、治金、纺织、食品、机械制造等行业制造过程中排放的酸、碱性废气的净化处 理。

When it comes to waste gas treatment equipment, he rents a car with many parts, which we should all know, of which the acid mist purification tower is the more important one. The acid mist purifying tower has been tested and analyzed. The purifying rate of sulfuric acid mist, nitric acid and hydrochloric acid mist can reach 93%, 90% and 98% respectively. The technical index of acid mist purifying performance has reached the advanced level in China. Following we will give you a detailed introduction: waste gas treatment equipment acid fog purification tower function introduction generally speaking, waste gas treatment equipment acid fog purification tower principle is the waste gas from the glass fiber reinforced plastic centrifugal fan into the purification tower inlet section, vertical upward and spray section from the top to bottom absorption liquid neutralization reaction, so that waste gas The concentration decreases, and then goes up into the packing section. The waste gas rolls on the plastic ball and reacts with the absorbed liquid to further reduce the concentration of the waste gas, then enters the dehydrator section, removes the droplets, and the purified gas discharges into the atmosphere. The acid mist purifying tower in waste gas treatment equipment can be widely used to purify the acid and alkaline waste gas discharged in the manufacturing process of electroplating, oxidation, chemical industry, pickling, electronics and electricity, gold control, textile, food, machinery manufacturing and other industries.